In this blog post the implementation of the LSTM recurrent neural network in CNTK will be shown in detail. The implementation will cover LSTM implementation based on Hochreiter & Schmidhuber (1997) paper which can be found here here. The great blog post about LSTM can also be found at colah’s blog, that explains in details the structure of the LSTM cell, as well as some of the most used LSTM variants. In this blog post the LSTM recurrent network will be implemented using CNTK, a deep learning tool using C# programming language and .NET Core platform. Also in case you want to see how to use pure C# without any additional library for LSTM implementation, you can see great MSDN article: Test Run – Understanding LSTM Cells Using C# By James McCaffrey.

Whole implementation of LSTM RNN is part of ANNdotNET – deep learning tool on .NET platform. More information about the project can be found at GitHub Project page: github.com/bhrnjica/anndotnet.

## Introduction to LSTM Recurrent Network

Classic neural networks are built on the fact that data don’t have any order when entering into the network, and the output depend only on the input features. In case when the output depends on features and previous outputs, the classic feed forward neural network cannot help. The solution for such problem may be neural network which can be recursively provides the previous outputs. This kind of network is called recurrent neural network RNN, and it was introduced by the Hopfields in the 1980s, and later popularized when the back-propagation algorithm was improved in the beginning of 1990s. Simple concept of the recurrent neural network can be shown on the following image.

The current output of the recurrent network is defined by
the current input X_{t}, and also on states related on the previous
network outputs h_{t-1}, h_{t-2,} …

The concept of the recurrent neural network is simple and easy to implement, but the problem raises during the training phase due to unpredictable gradient behavior. During training phase, gradient problem of neural network can be summarized in two categories: the *vanishing* and the *exploding* gradient.

The recurrent neural network is based on back-propagation algorithm, specially developed for the recurrent ANN, which is called back-propagation through time, BPTT. In * vanishing gradient* problem parameters updates are proportional to the gradient of the error, which in most cases negligibly small, and results that the corresponding weights are constant and stop the network from further training.

On the other hand, ** exploding gradient** problem refers to the opposite behavior, where the updates of weights (gradient of the cost function) became large in each back-propagation step. This problem is caused by the explosion of the long-term components in the recurrent neural network.

The solution to the above problems is specific design of there current network called Long Short-Term Memory, LSTM. One of the main advantages of the LSTM is that it can provide a constant error flow. In order to provide a constant error flow, the LSTM cell contains set of memory blocks,which have the ability to store the temporal state of the network. The LSTM also has special multiplicative units called ** gates** that control the information flow.

The LSTM cell consists of:

*input gate*– which controls the flow of the input activations into the memory cell,*output gate*which controls the output flow of the cell activation.-
*forget gate*, which filters the information from the input and previous output and decides which one should be remembered or forgot and dropped out.

Besides three gates the LSTM cell contains ** cell update** which is usually

*tanh*layer to be part of the cell state.

In each LSTM cell the three variables are coming into the cell:

- the current input x
_{t}, - previous output h
_{t-1}and - previous cell state c
_{t-1}.

On the other hand, from each LSTM cell two variables are getting out:

- the current output h
_{t}and - the current cell state c
_{t}.

Graphical representation of the LSTM cell is shown on the following image.

In order to implement LSTM recurrent network, first the LSTM cell should be implemented. The LSTM cell has three gates, and two internal states, which should be determined in order to calculate the current output and current cell state.

The LSTM cell can be define as neural network where the input vector in time , maps to the output vector , through the calculation of the following layers:

- the forget gate
*sigmoid*layer for the time t,*f*_{t}is calculated by the previous output h_{t-1}the input vector x_{t}, and the matrix of weights from the forget layer W_{f}with addition of corresponded bias b_{i}:

- the input gate
*sigmoid*layer for the time t,*i*_{t}is calculated by the previous output h_{t-1}the input vector x_{t}, and the matrix of weights from the input layer W_{i}with addition of corresponded bias b_{i}:

- the cell state in time t,
*C*_{t}is calculated from the forget gate*f*_{t}and the previous cell state*C*_{t-1. }The result is summed wth the input gate*i*_{t}and the cell update state , that is tanh layer calculated by the previous output h_{t-1}the input vector x_{t}, and the weight matrix for the cell with addition of corresponded bias b_{i}:

- the output gate
*sigmoid*layer for the time t,*o*_{t}is calculated by the previous output*h*_{t-1}, the input vector x_{t}, and the matrix of weights from the output layer W_{o}with addition of corresponded bias b_{i}:

The final stage of the LSTM cell is current output *h*_{t} calculation. The current output is calculated with the multiplication operation between output gate layer and *tanh* layer of the current cell state *C*_{t} .

The current output *h*_{t}, has passed through the network as the previous state for the next LSTM cell, or as the input for neural network output layer.

## LSTM with Peephole connection

One of the LSTM variant which is implemented in python based CNTK is LSTM with peephole connection which is first introduced by Gers & Schmidhuber (2000). LSTM with peephole connection let each gate (forget, input and output) look at the cell state.

Now the gates with peephole connection can be expressed sothat the started terms of each gates are extended with additional matrix of *Ct*.So, the forget gate with peephole can be expressed:

Similarly, the input gate and the output gate with peephole connection are expressed as:

,

.

With peephole connection LSTM cell get additional matrix for each gate and the number of LSTM parameters are increased by additional 3m_{X}m parameters, where m – is output dimension.

## Implementation of LSTM Recurrent network

The CNTK is Microsoft open source library for deep learning written in C++, but it can be run from various programming languages: Python,C#, R, Java. In order to use the library in C#, the CNTK related Nugget package has to be installed, and the project must be built for 64bit architecture.

- So open Visual Studio 2017 and create simple .NET Core Console application.
- Then install CNTK GPU Nugget package to your recently created console application.

Once the startup project is created the LSTM CNTK implementation can be started.

## Implementation of the LSTM Cell

As stated previously the implementation presented in this blog post is originally implemented in ANNdotNET – open source project for deep learning on .NET platform. It can be found at official GitHub project page.

The LSTM recurrent network starts by implementation of the LSTMCell class. The LSTMCell class is derived from the NetworkFoundation class which implements basic neural network operations. The Basic operations are implemented through the implementation of the following methods:

- Bias – bias parameters implementation
- Weights – implementation of the weights parameters
- Layer – implementation of the classic fully connected linear layer
- AFunction – applying activation function on the layer.

NetworkFoundation class is shown in the next code snippet

/////////////////////////////////////////////////////////////////////////////////////////// // ANNdotNET - Deep Learning Tool on .NET Platform // Copyright 2017-2018 Bahrudin Hrnjica // // This code is free software under the MIT License // // See license section of https://github.com/bhrnjica/anndotnet/blob/master/LICENSE.md // // // Bahrudin Hrnjica // bhrnjica@hotmail.com // Bihac, Bosnia and Herzegovina // // http://bhrnjica.net ////////////////////////////////////////////////////////////////////////////////////////// using CNTK; using NNetwork.Core.Common; namespace NNetwork.Core.Network { public class NetworkFoundation { public Variable Layer(Variable x, int outDim, DataType dataType, DeviceDescriptor device, uint seed = 1 , string name="") { var b = Bias(outDim, dataType, device); var W = Weights(outDim, dataType, device, seed, name); var Wx = CNTKLib.Times(W, x, name+"_wx"); var l = CNTKLib.Plus(b,Wx, name); return l; } public Parameter Bias(int nDimension, DataType dataType, DeviceDescriptor device) { //initial value var initValue = 0.01; NDShape shape = new int[] { nDimension }; var b = new Parameter(shape, dataType, initValue, device, "_b"); // return b; } public Parameter Weights(int nDimension, DataType dataType, DeviceDescriptor device, uint seed = 1, string name = "") { //initializer of parameter var glorotI = CNTKLib.GlorotUniformInitializer(1.0, 1, 0, seed); //create shape the dimension is partially known NDShape shape = new int[] { nDimension, NDShape.InferredDimension }; var w = new Parameter(shape, dataType, glorotI, device, name=="" ? "_w" : name); // return w; } public Function AFunction(Variable x, Activation activation, string outputName="") { switch (activation) { default: case Activation.None: return x; case Activation.ReLU: return CNTKLib.ReLU(x, outputName); case Activation.Softmax: return CNTKLib.Sigmoid(x, outputName); case Activation.Tanh: return CNTKLib.Tanh(x, outputName); } } }}

As can be seen, methods implement basic neural buildingblocks, which can be apply to any network type. Once the NetworkFoundation baseclass is implemented, the LSTM cell class implementation starts by definingthree properties and custom constructor, that is shown in the following code snippet:

/////////////////////////////////////////////////////////////////////////////////////////// // ANNdotNET - Deep Learning Tool on .NET Platform // Copyright 2017-2018 Bahrudin Hrnjica // // This code is free software under the MIT License // // See license section of https://github.com/bhrnjica/anndotnet/blob/master/LICENSE.md // // // Bahrudin Hrnjica // bhrnjica@hotmail.com // Bihac, Bosnia and Herzegovina // // http://bhrnjica.net ////////////////////////////////////////////////////////////////////////////////////////// using CNTK; using NNetwork.Core.Common; namespace NNetwork.Core.Network.Modules { public class LSTM : NetworkFoundation { public Variable X { get; set; } //LSTM Cell Input public Function H { get; set; } //LSTM Cell Output public Function C { get; set; } //LSTM Cell State public LSTM(Variable input, Variable dh, Variable dc, DataType dataType, Activation actFun, bool usePeephole, bool useStabilizer, uint seed, DeviceDescriptor device) { //create cell state var c = CellState(input, dh, dc, dataType, actFun, usePeephole, useStabilizer, device, ref seed); //create output from input and cell state var h = CellOutput(input, dh, c, dataType, device, useStabilizer, usePeephole, actFun, ref seed); //initialize properties X = input; H = h; C = c; }

Properties X, H and C, hold current values of the LSTM cell,once the LSTM object is created. The LSTM constructor takes several arguments:

- the first three are variables for the input, previous output and previous cell state;
- the activation function of the cell update layer.

The constructor also contains two arguments for creation a different LSTM variant: peepholes, and self-stabilization, and few other self-explained arguments. The LSTM constructor creates cell state and output by calling CellState and CellOutput methods respectively. Thei mplementation of those methods is shown on the next code snippet:

public Function CellState(Variable x, Variable ht_1, Variable ct_1, DataType dataType, Activation activationFun, bool usePeephole, bool useStabilizer, DeviceDescriptor device, ref uint seed) { var ft = AGate(x, ht_1, ct_1, dataType, usePeephole, useStabilizer, device, ref seed, "ForgetGate"); var it = AGate(x, ht_1, ct_1, dataType, usePeephole, useStabilizer, device, ref seed, "InputGate"); var tan = Gate(x, ht_1, ct_1.Shape[0], dataType, device, ref seed); //apply Tanh (or other) to gate var tanH = AFunction(tan, activationFun, "TanHCt_1" ); //calculate cell state var bft = CNTKLib.ElementTimes(ft, ct_1,"ftct_1"); var bit = CNTKLib.ElementTimes(it, tanH, "ittanH"); //cell state var ct = CNTKLib.Plus(bft, bit, "CellState"); // return ct; } public Function CellOutput(Variable input, Variable ht_1, Variable ct, DataType dataType, DeviceDescriptor device, bool useStabilizer, bool usePeephole, Activation actFun ,ref uint seed) { var ot = AGate(input, ht_1, ct, dataType, usePeephole, useStabilizer, device, ref seed, "OutputGate"); //apply activation function to cell state var tanHCt = AFunction(ct, actFun, "TanHCt"); //calculate output var ht = CNTKLib.ElementTimes(ot, tanHCt,"Output"); //create output layer in case different dimensions between cell and output var c = ct; Function h = null; if (ht.Shape[0] != ct.Shape[0]) { //rectified dimensions by adding linear layer var so = !useStabilizer? ct : Stabilizer(ct, device); var wx_b = Weights(ht_1.Shape[0], dataType, device, seed++); h = wx_b * so; } else h = ht; return h; }

Above methods have been implemented by using previously defined gates and blocks. The method AGate creates LSTM gate. The method is called two times in order to create forget and input gates. Then the Gate method is called in order to create linear layer for the update cell state. The activation function is provided as the constructor argument. Implementation of AGate and Gate functions is shown in the following code snippet:

public Variable AGate(Variable x, Variable ht_1, Variable ct_1, DataType dataType, bool usePeephole, bool useStabilizer, DeviceDescriptor device, ref uint seed, string name) { //cell dimension int cellDim = ct_1.Shape[0]; //define previous output with stabilization of if defined var h_prev = !useStabilizer ? ht_1 : Stabilizer(ht_1, device); //create linear gate var gate = Gate(x, h_prev, cellDim, dataType, device, ref seed); if (usePeephole) { var c_prev = !useStabilizer ? ct_1 : Stabilizer(ct_1, device); gate = gate + Peep(c_prev, dataType, device, ref seed); } //create forget gate var sgate = CNTKLib.Sigmoid(gate, name); return sgate; } private Variable Gate(Variable x, Variable hPrev, int cellDim, DataType dataType, DeviceDescriptor device, ref uint seed) { //create linear layer var xw_b = Layer(x, cellDim, dataType, device, seed++); var u = Weights(cellDim, dataType, device, seed++,"_u"); // var gate = xw_b + (u * hPrev); return gate; }

As can be seen AGate calls the Gate method in order to create linear layer, and then apply the activation function.

In order to create LSTM variant with ** peephole **connection, as well as LSTM with

**, two additional methods are implemented. The peephole connection is explained previously. The implementation of Stabilizer methods is based on the implementation found at C# examples on the CNTK github page, with minor modification and re-factorization.**

*self-stabilization*internal Variable Stabilizer(Variable x, DeviceDescriptor device) { //define floating number var f = Constant.Scalar(4.0f, device); //make inversion of prev. value var fInv = Constant.Scalar(f.DataType, 1.0 / 4.0f); //create value of 1/f*ln (e^f-1) double initValue = 0.99537863; //create param with initial value var param = new Parameter(new NDShape(), f.DataType, initValue, device, "_stabilize"); //make exp of product scalar and parameter var expValue = CNTKLib.Exp(CNTKLib.ElementTimes(f, param)); // var cost = Constant.Scalar(f.DataType, 1.0) + expValue; var log = CNTKLib.Log(cost); var beta = CNTKLib.ElementTimes(fInv, log); //multiplication of the variable layer with constant scalar beta var finalValue = CNTKLib.ElementTimes(beta, x); return finalValue; } internal Function Peep(Variable cstate, DataType dataType, DeviceDescriptor device, ref uint seed) { //initial value var initValue = CNTKLib.GlorotUniformInitializer(1.0, 1, 0, seed); //create shape which for bias should be 1xn NDShape shape = new int[] { cstate.Shape[0] }; var bf = new Parameter(shape, dataType, initValue, device, "_peep"); var peep = CNTKLib.ElementTimes(bf, cstate); return peep; }

The Peep method is based on previous description in the blog post, that simply adds the additional set of parameters which includes the previous cell state into Gates.

## Implementation of the LSTM Recurrent Network

Once we have the LSTM cell implementation it is easy toimplement recurrent network based on LSTM. Previously the LSTM is defined withthree input variables: input and two previous state variables. Those previous states should be defined not as real variables but as placeholders, and should be changed dynamically for each iteration. So, the recurrent network starts by defining placeholders of previous output and previous cell state. Then the LSTMcell object is created. Once the the LSTM is created, the actual values is replaced by the previous values by calling the CNTK method PastValue. Then the placeholders are replaced with the past values of the variables. At the end the method return the CNTK Function object, which can be one of two cases, which is controlled by the *returnSequence* argument:

- first case where the method returns the full sequence,
- second case where the methods return the last element of the sequence.

///////////////////////////////////////////////////////////////////////////////////////// // ANNdotNET - Deep Learning Tool on .NET Platform // Copyright 2017-2018 Bahrudin Hrnjica // // This code is free software under the MIT License // See license section of https://github.com/bhrnjica/anndotnet/blob/master/LICENSE.md // // Bahrudin Hrnjica // bhrnjica@hotmail.com // Bihac, Bosnia and Herzegovina // http://bhrnjica.net // //////////////////////////////////////////////////////////////////////////////////////// using CNTK; using NNetwork.Core.Common; using NNetwork.Core.Network.Modules; using System; using System.Collections.Generic; namespace NNetwork.Core.Network { public class RNN { public static Function RecurrenceLSTM(Variable input, int outputDim, int cellDim, DataType dataType, DeviceDescriptor device, bool returnSequence=false, Activation actFun = Activation.TanH, bool usePeephole = true, bool useStabilizer = true, uint seed = 1) { if (outputDim <= 0 || cellDim <= 0) throw new Exception("Dimension of LSTM cell cannot be zero."); //prepare output and cell dimensions NDShape hShape = new int[] { outputDim }; NDShape cShape = new int[] { cellDim }; //create placeholders //Define previous output and previous cell state as placeholder which will be replace with past values later var dh = Variable.PlaceholderVariable(hShape, input.DynamicAxes); var dc = Variable.PlaceholderVariable(cShape, input.DynamicAxes); //create lstm cell var lstmCell = new LSTM(input, dh, dc, dataType, actFun, usePeephole, useStabilizer, seed, device); //get actual values of output and cell state var actualDh = CNTKLib.PastValue(lstmCell.H); var actualDc = CNTKLib.PastValue(lstmCell.C); // Form the recurrence loop by replacing the dh and dc placeholders with the actualDh and actualDc lstmCell.H.ReplacePlaceholders(new Dictionary<Variable, Variable> { { dh, actualDh }, { dc, actualDc } }); //return value depending of type of LSTM layer if (returnSequence) return lstmCell.H; else return CNTKLib.SequenceLast(lstmCell.H); } }}

As can be seen, the RNN class contains only one static method, which return the CNTK Function object which contains the recurrent network with LSTM cell. The method takes several arguments: input variable, dimension of the output of the recurrent network, dimension of the LSTM cell, and the additional arguments for creation different variants of the LSTM cell.

## Implementation of Test Application

Now that the full LSTM based recurrent network is implemented, we are going to provide the test application that can test basic LSTM functionality. The application contains two test methods in order to check:

- number of LSTM parameters, and
- output and cell states of the LSTM cell for two iterations.

### Testing the correct number of the parameters

The first method implements validation of the correct numberof LSTM parameters. The LSTM cell has three kinds of matrices: U and W and bfor each LSTM component: forget, input and output gate, and cell update.

Let assume the number of input dimension is ** n**,and the number of output is

**. Also let assume that dimension number of the cell is equal to output dimension. We can defined the following matrices:**

*m*- U matrix with dimensions of mxn
- W matrix with dimensions of mxm
- B matrix (vector) with dimensions 1xm

In total the LSTM has .

In case the LSTM has peephole connection the the number of parameters is increased with additional C matrix with 1xm parameters.

In total the LSTM with peephole connection has . The test method is implemented for n=3, and m=4, so the total number of parameters for default LSTM cell is P(n)=4(9+6+3)=4*18=72. With peephole connection the LSTM cell has P(n)= 4(9+6+3)+3*1*4 = 4*18+3*16 = 72+12=84.

In case the LSTM cell is defined with self-stabilization parameter, the additional 4xm parameters are defined.

Now that we defined parameter number for pure LSTM, with peephole and self-stabilization, we can implement test methods based on n=3 and m=4:

[TestMethod] public void LSTM_Test_Params_Count() { //define values, and variables Variable x = Variable.InputVariable(new int[] { 3 }, DataType.Float, "input"); Variable y = Variable.InputVariable(new int[] { 4 }, DataType.Float, "output"); //Number of LSTM parameters var lstm1 = RNN.RecurrenceLSTM(x,4,4, DataType.Float,device, Activation.Tanh,true,true,1); var ft = lstm1.Inputs.Where(l=>l.Uid.StartsWith("Parameter")).ToList(); var consts = lstm1.Inputs.Where(l => l.Uid.StartsWith("Constant")).ToList(); var inp = lstm1.Inputs.Where(l => l.Uid.StartsWith("Input")).ToList(); //bias params var bs = ft.Where(p=>p.Name.Contains("_b")).ToList(); var totalBs = bs.Sum(v => v.Shape.TotalSize); Assert.AreEqual(totalBs,12); //weights var ws = ft.Where(p => p.Name.Contains("_w")).ToList(); var totalWs = ws.Sum(v => v.Shape.TotalSize); Assert.AreEqual(totalWs, 24); //update var us = ft.Where(p => p.Name.Contains("_u")).ToList(); var totalUs = us.Sum(v => v.Shape.TotalSize); Assert.AreEqual(totalUs, 36); var totalOnly = totalBs + totalWs + totalUs; var totalWithSTabilize = totalOnly + totalst; var totalWithPeep = totalOnly + totalPh; var totalP = totalOnly + totalst + totalPh; var totalParams = ft.Sum(v=>v.Shape.TotalSize); Assert.AreEqual(totalP,totalParams); }

### Testing the output and cell state values

In this test the network parameters input, previous output and cell states are setup. The result of this test is weather the LSTM cell returns correct output and cell state values for first and second iteration. The implementation of this test is shows on the following code snippet:

public void LSTM_Test_WeightsValues() { //define values, and variables Variable x = Variable.InputVariable(new int[] { 2 }, DataType.Float, "input"); Variable y = Variable.InputVariable(new int[] { 3 }, DataType.Float, "output"); //data 01 var x1Values = Value.CreateBatch<float>(new NDShape(1, 2), new float[] { 1f, 2f }, device); var ct_1Values = Value.CreateBatch<float>(new NDShape(1, 3), new float[] { 0f, 0f, 0f }, device); var ht_1Values = Value.CreateBatch<float>(new NDShape(1, 3), new float[] { 0f, 0f, 0f }, device); var y1Values = Value.CreateBatch<float>(new NDShape(1, 3), new float[] { 0.0629f, 0.0878f, 0.1143f }, device); //data 02 var x2Values = Value.CreateBatch<float>(new NDShape(1, 2), new float[] { 3f, 4f }, device); var y2Values = Value.CreateBatch<float>(new NDShape(1, 3), new float[] { 0.1282f, 0.2066f, 0.2883f }, device); //Create LSTM Cell with predefined previous output and prev cell state Variable ht_1 = Variable.InputVariable(new int[] { 3 }, DataType.Float, "prevOutput"); Variable ct_1 = Variable.InputVariable(new int[] { 3 }, DataType.Float, "prevCellState"); var lstmCell = new LSTM(x, ht_1, ct_1, DataType.Float, Activation.Tanh, false, false, 1, device); var ft = lstmCell.H.Inputs.Where(l => l.Uid.StartsWith("Parameter")).ToList(); var pCount = ft.Sum(p => p.Shape.TotalSize); var consts = lstmCell.H.Inputs.Where(l => l.Uid.StartsWith("Constant")).ToList(); var inp = lstmCell.H.Inputs.Where(l => l.Uid.StartsWith("Input")).ToList(); //bias params var bs = ft.Where(p => p.Name.Contains("_b")).ToList(); var pa = new Parameter(bs[0]); pa.SetValue(new NDArrayView(pa.Shape, new float[] { 0.16f, 0.17f, 0.18f }, device)); var pa1 = new Parameter(bs[1]); pa1.SetValue(new NDArrayView(pa1.Shape, new float[] { 0.16f, 0.17f, 0.18f }, device)); var pa2 = new Parameter(bs[2]); pa2.SetValue(new NDArrayView(pa2.Shape, new float[] { 0.16f, 0.17f, 0.18f }, device)); var pa3 = new Parameter(bs[3]); pa3.SetValue(new NDArrayView(pa3.Shape, new float[] { 0.16f, 0.17f, 0.18f }, device)); //set value to weights parameters var ws = ft.Where(p => p.Name.Contains("_w")).ToList(); var ws0 = new Parameter(ws[0]); var ws1 = new Parameter(ws[1]); var ws2 = new Parameter(ws[2]); var ws3 = new Parameter(ws[3]); (ws0).SetValue(new NDArrayView(ws0.Shape, new float[] { 0.01f, 0.03f, 0.05f, 0.02f, 0.04f, 0.06f }, device)); (ws1).SetValue(new NDArrayView(ws1.Shape, new float[] { 0.01f, 0.03f, 0.05f, 0.02f, 0.04f, 0.06f }, device)); (ws2).SetValue(new NDArrayView(ws2.Shape, new float[] { 0.01f, 0.03f, 0.05f, 0.02f, 0.04f, 0.06f }, device)); (ws3).SetValue(new NDArrayView(ws3.Shape, new float[] { 0.01f, 0.03f, 0.05f, 0.02f, 0.04f, 0.06f }, device)); //set value to update parameters var us = ft.Where(p => p.Name.Contains("_u")).ToList(); var us0 = new Parameter(us[0]); var us1 = new Parameter(us[1]); var us2 = new Parameter(us[2]); var us3 = new Parameter(us[3]); (us0).SetValue(new NDArrayView(us0.Shape, new float[] { 0.07f, 0.10f, 0.13f, 0.08f, 0.11f, 0.14f, 0.09f, 0.12f, 0.15f }, device)); (us1).SetValue(new NDArrayView(us1.Shape, new float[] { 0.07f, 0.10f, 0.13f, 0.08f, 0.11f, 0.14f, 0.09f, 0.12f, 0.15f }, device)); (us2).SetValue(new NDArrayView(us2.Shape, new float[] { 0.07f, 0.10f, 0.13f, 0.08f, 0.11f, 0.14f, 0.09f, 0.12f, 0.15f }, device)); (us3).SetValue(new NDArrayView(us3.Shape, new float[] { 0.07f, 0.10f, 0.13f, 0.08f, 0.11f, 0.14f, 0.09f, 0.12f, 0.15f }, device)); //evaluate //Evaluate model after weights are setup var inV = new Dictionary<Variable, Value>(); inV.Add(x, x1Values); inV.Add(ht_1, ht_1Values); inV.Add(ct_1, ct_1Values); //evaluate output when previous values are zero var outV11 = new Dictionary<Variable, Value>(); outV11.Add(lstmCell.H, null); lstmCell.H.Evaluate(inV, outV11, device); //test result values var result = outV11[lstmCell.H].GetDenseData<float>(lstmCell.H); Assert.AreEqual(result[0][0], 0.06286034f);// Assert.AreEqual(result[0][1], 0.0878196657f);// Assert.AreEqual(result[0][2], 0.114274308f);// //evaluate cell state var outV = new Dictionary<Variable, Value>(); outV.Add(lstmCell.C, null); lstmCell.C.Evaluate(inV, outV, device); var resultc = outV[lstmCell.C].GetDenseData<float>(lstmCell.C); Assert.AreEqual(resultc[0][0], 0.114309229f);// Assert.AreEqual(resultc[0][1], 0.15543206f);// Assert.AreEqual(resultc[0][2], 0.197323829f);// //evaluate second value, with previous values as previous state //setup previous state and output ct_1Values = Value.CreateBatch<float>(new NDShape(1, 3), new float[] { resultc[0][0], resultc[0][1], resultc[0][2] }, device); ht_1Values = Value.CreateBatch<float>(new NDShape(1, 3), new float[] { result[0][0], result[0][1], result[0][2] }, device); //Prepare for the evaluation inV = new Dictionary<Variable, Value>(); inV.Add(x, x2Values); inV.Add(ht_1, ht_1Values); inV.Add(ct_1, ct_1Values); outV11 = new Dictionary<Variable, Value>(); outV11.Add(lstmCell.H, null); lstmCell.H.Evaluate(inV, outV11, device); //test result values result = outV11[lstmCell.H].GetDenseData<float>(lstmCell.H); Assert.AreEqual(result[0][0], 0.128203377f);// Assert.AreEqual(result[0][1], 0.206633776f);// Assert.AreEqual(result[0][2], 0.288335562f);// //evaluate cell state outV = new Dictionary<Variable, Value>(); outV.Add(lstmCell.C, null); lstmCell.C.Evaluate(inV, outV, device); //evaluate cell state with previous value resultc = outV[lstmCell.C].GetDenseData<float>(lstmCell.C); Assert.AreEqual(resultc[0][0], 0.227831185f);// Assert.AreEqual(resultc[0][1], 0.3523231f);// Assert.AreEqual(resultc[0][2], 0.4789199f);// }

In this article the implementation of the LSTM cell is presented in details from the theory and implementation. Also the article contains two test methods in order to prove the correctness of the implementation. The result values of the output and the cell states are compared with manually calculated values.

how can we use this function for stock prediction